The Universal Tool Soldering Kit is an ideal addition to any hobby shop, DIY or home garage mechanic. Inside of the tool box you'll find a soldering iron, 4 extra solder tips, solder with flux, a roll of electrical tape, a circuit tester and a soldering stand.
The Universal Tool Soldering Kit is an ideal addition to any hobby shop, DIYer or home garage mechanic. Inside of the tool box you'll find a soldering iron, 4 extra solder tips, solder with flux, a roll of electrical tape, a circuit tester and a soldering stand!
The Soldering Iron is lightweight and has a pencil handle for delicate work. The 60 watt element allows for quicker melting and easier detail work as compared to other lower watt units. The temperature is adjustable between 392° and 842°F. The soldering iron comes with a stand to keep the heat off of your work surface.
With the set of four Soldering Iron Tips, your iron will be four times better! Each of the four 3" tips are constructed of durable steel alloy and can be used with any iron with wattage between 25 and 100.
The Universal Tool Circuit Tester is great for checking if the circuits around your house are working properly. You can use this one-lead tester to confirm that you have a good, complete circuit, and that the ground wires are actually connected to the ground.
The 8" Crimping Tool will come in handy on just about any project. It features a wire stripper and wire cutter as well as ignition terminals.
The Electrical Tape comes in a 20ft roll and is ideal for wrapping electrical wire to stop currents passing to another wire by mistake. It can also be used for a variety of household purposes from kitchen fixes to on the job DIY mends.
Inside the tool box you'll also find a 1mm 10g Flux Coated Solder. This solder with flux is great for electricians, computer repairs, crafts, hobbies and much more.
Lastly you'll find the Helping Hands Soldering Stand! It comes with an attached 2½" diameter 4x magnifier as well as a full 360° rotating feature. This stand will allow you to do hands free work!
Make sure to grab one of these kits!
|Soldering Iron: 60 Wattage; 11" Length; 392 to 842 degrees F; Removable Tip for Interchangeable Tips||Soldering Iron Tips: 3 mm Shank/Shaft Diameter; 3" Length; 25-100 Wattage (Watt Irons)|
|Circuit Tester: 7" x 1" Dimensions; 32" Cord Length; LED Check Light||Crimping Tool: 8" Length|
|Solder with Flux: 1 mm; 10 g||Hobby Station Stand: 4x Magnification; 2.5" Lens Diameter; 2 Adjustable Arms with Alligator Clips; Magnifier Clips and Joints Rotate 360 degrees; Chrome Plated; Heavy Duty Base|
|Wire Stripper and Wire Cutter||20 ft. Electrical Tape|